24
after successful ignition (Fig. 54)
Fig.54
22·Setting the time delay for reignite after auto ash
cleaning. For example: the stove will reignite in 180s
after finishing the auto ash cleaning. (Fig. 55)
Fig.55
6.0 ERROR AND SOLUTION
1·Display shows E1
，
replacing NTC room temperature sensor (Fig. 56)
（
10K
）
.
Fig.56
2·Display shows E2
，
replacing the K type flame sensor. (Fig. 57)
Fig.57
3·Display shows E3
，
check if the hopper is empty
，
if the feeder is blocked
，
or the air inlet of the burning chamber
be blocked (Fig. 58)
Fig.58
