2018PC-03/03
25
Fig.34
22·Setting the time delay for reignite after auto ash cleaning. For example: the stove will reignite in 180s after finishing
the auto ash cleaning. (Fig.35)
Fig35
6.0 ERROR AND SOLUTION
1·Display shows E1
,
the NTC room temperature is missing or broken, please replacing NTC
room temperature sensor (Fig. 56)
(
10K
)
.
2·Display shows E2
,
the flame sensor is missing or broken, please replacing the K type flame
sensor. (Fig. 57)
3·Display shows E3
,
the pellet hopper is empty, please refuel.
4. Display shows E4, the burning grate is not in the right place, please replace it.
5. Display shows E5, the pressure of burning chamber is not normal, please close all the parts of
this stove, and press setting button to replace it, DO NOT OPEN THE DOOR OVER 30
SECONDS.