background image

USER MANUAL #CL-RUH24 | 2,400 LUMENS LED RECHARGEABLE UNDER HOOD WORKLIGHT

USER MANUAL #CL-RUH24 | 2,400 LUMENS LED RECHARGEABLE UNDER HOOD WORKLIGHT

CARE FOR YOUR PRODUCT:

This product has a two-year warranty from the date of purchase—this guarantees against 

failure due to factory defects, whether caused by materials or workmanship. The warranty 

is non-transferable and only pertains to the original purchaser.  Proof of purchase is 

required for any repair or replacement, so please keep your proof of purchase receipt.  This 

warranty does not cover normal wear and tear or damage due to misuse.  Misuse of this 

product includes but is not limited to:

• Using outdoors in extreme weather conditions.

• Opening the product’s housing.

• Any attempts to update, remodel or fix the unit yourself.

WARNING:

YOU SHOULD ALWAYS FOLLOW BASIC PRECAUTIONS.

Read, follow, and understand all instructions and warnings before beginning 

any installation of this product.  Failure to do so can result in electric shock, fire, 

or other injuries, including death.  Save this user manual for instructions and 

warnings for possible future relocation and installation.

CAUTION:

• This product is not waterproof and is designed for dry use only.

• Avoid environments with extreme dust and/or humidity. 

• Avoid areas with temperatures higher than 104 Fahrenheit.

• Avoid using this product near flammable materials and/or gas.

• DO NOT use on radiant-heating type of ceilings.

• Always shut off the main power supply at the circuit breaker before removing  

  or relocating this product from any area.

EYES:

   

• DO NOT look directly at the LED lights.

   

• DO NOT remove the LED lights protective covering.

If you have questions or missing parts, please contact our customer care at 1-888-745-4837

If you have questions or missing parts, please contact our customer care at 1-888-745-4837

WARNING:

RISK OF ELECTRICAL SHOCK.

TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN 

OFF THE MAIN POWER SOURCE OR DISCONNECT POWER 

DURING THE INSTALLATION OR SERVICE

OF THIS PRODUCT

THIS PRODUCT MAY PRESENT A 

POSSIBLE SHOCK OR FIRE HAZARD IF 

IMPROPERLY INSTALLED OR MOUNTED. PRODUCTS 

SHOULD BE INSTALLED FOLLOWING THESE INSTRUCTIONS,

LOCAL ELECTRICAL CODES, AND THE CURRENT 

NATIONAL ELECTRIC CODE (NEC).

BEFORE YOUR FIRST USE, PLEASE CHARGE AND DISCHARGE THE BATTERIES

Charging:

•  Completely charge the batteries before your first use the lamp.

•  The lamp must be charged per three months to protect the battery lifetime.

•  Use the included dual head USB-C cable to charge the lamps.

•  The battery charging status can be determined by reading the battery status. If all  

  4 LEDs are lit , the battery is fully charged.

•  Use the USB (Type A) port on each lamp to charge external devices such as your phone.

Usage:

The on-off switch

•  Press one time : Main LED 50%

•  Press second time : Main LED 100%

•  Press third time : OFF

Diagram:

1.  Telescopic bracket 

2. Bracket fixing seat

3. Shockproof circle

4. Aluminum tube fixing sleeve

5. Aluminum Tube

6. Damping Rotor

7. Single lamp

Reviews: