26
DIGITAL VIDEO RECORDER
Basic Recording (
Normal Recording)
The DVR comes with a certain preset settings from the factory. Therefore once the
DVR is installed, immediate recording is possible after pressing the record buttons. By
default, audio alarm, motion recording are off.
１
.
Use Direction buttons [
] to select “RECORD” menu. Then, press [ENTER]
button to display “RECORD”.
２
.
Use Direction buttons [
] to select the Camera you wish to configure.
３
.
Use [-, +] button to change the value.
ITEM
ADJUSTMENT
USE
Enable or Disable Recording per camera.
QUALITY
Specify the record picture quality for each camera.
ULTRA
SUPER
HIGH
MIDDLE
LOW
RATE
Select recording speed for each camera.
: Three types of recording modes are available: Frame, Field and CIF mode.
<Refer to
System
>
AUDIO
Select audio recording ON or OFF.
<In case of 16ch DVR, 1~8ch are only available for Audio setup and recording>
MOTION
Select Motion Recording ON or OFF. Camera does not record under normal
conditions. It is discussed on Motion Recording Section.
5.
Save changes
and exit the menu, press
[ENTER]
button.
6. Press [
REC]
button. Then, the red REC LED light on the front panel and recording
starts.
7. To Record stop, press the “
STOP
” button.
Keepsafe Alarms Ltd
044 93 72168
Parsonstown, Mullingar, Co. Westmeath.
www.keepsafealarms.ie
