17
MOBILE
DIGITAL VIDEO RECORDER
1.
RECORD
1-1. RECORD MODE
1)
Select “RECORD MODE” on TAP menu by using Directional buttons.
2)
Select MODE by pressing “–/+” buttons on the remote controller or on the unit.
3)
Press [ENTER] button to exit a menu with saving changes. Press [CANCLE] to
exit a menu without making changes.
RECORD
MODE
MODE1 ~ MODE 8 : Default
Channel
Resolution
Continuous
Motion
Alarm
1
D1(720*480)
15/Q3
OFF/Q4
30/Q4
2
CIF(360*240)
15/Q3
OFF/Q4
30/Q4
3
CIF(360*240)
15/Q3
OFF/Q4
30/Q4
4
CIF(360*240
15/Q3
OFF/Q4
30/Q4
NOTE: Each(MODE1 to MODE8) recording modes are customizable in Advaced Menu.
2.
AUDIO IN
Select the channel of where you want to record the audio from by using “-/+”
buttons.
3.
POST RECORDING
Set up the post recording duration after a motion or event is triggered using “-/+”
buttons.
4.
RUN ADVANCED
Select “ON” or “OFF” by pressing “–/+” buttons on the remote controller or on the
unit.
1)
“ON” : Select this to enter into main menu and press [ENTER] button to exit a
menu with saving changes.
Escape from “QUICK SETUP” menu by pressing “ESC” button.*
Press MENU button again to enter into MAIN MENU.
2)
“OFF” : Select this to stay on “QUICK SETUP” menu.
3)
To resume Quick SETUP menu from Main Menu, refer to 2-1 DISPLAY SETUP part
in manual
