23
MOBILE
DIGITAL VIDEO RECORDER
3. Camera Setup
1.
Use Direction buttons [
] to select “CAMERA” menu. Then, press [ENTER]
button to display “CAMERA”.
2.
Use Left/Right buttons [
] or Number button to select the Camera you wish to
configure.
3.
Use Down [
] button to move specified menu and use Left/Right buttons
[
] to select other item.
4.
Use [-, +] button to change the value.
ITEM
DEFAULT
ADJUSTMENT
BRIGHTNESS
50%
The brightness of each camera can be adjusted by pressing [-,+] buttons.
CONTRAST
50%
The contrast of each camera can be adjusted by pressing [-,+] buttons.
COLOR
50%
The color of each camera can be adjusted by pressing [-,+] buttons.
SENSITIVITY
10
Level 1: Low sensitivity~ Level 20: High sensitivity.
MOTION GRID
Use this menu to setup Zones for the motion detection The screen shown
below will overlay the current video image.
Motion zones are set by on – it’s covered as cross stripes Screen.
It is divided into 16 Grid and selected by Number button on IR Remote.
: Select All. Press Enter to select
: Clear All. Press Enter to select
: Select specific. Press Enter to select.
