48
MOBILE
DIGITAL VIDEO RECORDER
2. Log List Search/Alarm, Motion Search
The logs can be used to search and review directly to a point in time of the recorded
data. Alarm, motion, video loss and system related logs can be searched and
played back directly from the time of the incident.
１
.
To start Event Search, press
[Log] button on the front, then Log List
Menu pops up, as shown below.
MENU TAP
CONDITION
ALL
It has a list of all the events since the initial power on procedure of DVR
SYSTEM
It shows All Event except for Alarm, Motion, and Video Loss.
NETWORK
It shows NETWORK List.
MOTION
It shows Motion List.
VLOSS
It shows Video Loss List.
EVENT
It shows EVENT List.
2. Use Up/Down buttons [
] to desired “Time” to playback. Use Left/Right
buttons [
] to move NEXT page.
3. Press [ENTER] button to start playback.
<Note>
Log list is saved on HDD.
<Note>
To save log output, please connect USB memory stick into USB port on front. Then
press Display button on each category to backup Log data. USB Icon will be flashed as
Blue.
