A
DVANCED
M
ODE
Advanced Mode
If you have selected the
Go Directly to Advanced Mode
option in the start-up window of
the Direct-to-Disc Wizard, the following window will appear:
This mode gives you the option of performing all the necessary settings quickly and
comfortably on a single screen. In this case, Fields 1 to 4 correspond to the four
windows that you proceed through when using the Direct-to-Disc Wizard:
Field 1: Select source
This field displays the video source devices available. Should more than one option be
listed, please select the device you wish to use.
Options
allows you to perform the driver settings for your video source device.
The video being imported from the video source is displayed in the
Preview window
,
enabling you to make sure that the device is correctly connected.
You may also correct the video source settings for the DVD recording (e.g.
programming the correct TV channel or searching for a particular position from which
to start recording). The Wizard displays a variety of options below the preview
window, independent of the type of video device.
For further details regarding this field, please refer to
Window 1: Select video source
.
14
Instant DVD Recorder