Set up Your ShowCenter System
Wireless Network Connection
A wireless network connection (WLAN) can be created in two ways.
The first way is to create a wireless connection directly between the ShowCenter
Player and a PC. This is also called "ad-hoc mode" or a "wireless direct
connection". For this, your PC must have a WLAN adapter.
The second way is to use "infrastructure mode" via a WLAN access point
(WLAN router).
In the following, PC configuration for a wireless network is described first.
Wireless direct connection (ad-hoc mode)
The ShowCenter Player supports a high-speed 11g connection in ad-hoc
mode. However, many 11g PC-WLAN adapters are not able to provide this and
only offer low transmission rates in ad-hoc mode according to the 11b standard.
With this connection, movies can only be played without any problems in just a
few cases. Therefore, we recommend a wireless direct connection only in
exceptional cases and urgently advise you to use a WLAN access point.
First make sure that the WLAN adapter on you PC is properly installed,
activated, and functioning.
Open the control panel via
Start
/
Settings
.
Double-click the
Network and Dial-up Connections
icon and then the icon for
the WLAN adapter on your PC.
Click
Advanced
and then
Add
. If you have installed Windows XP Service Pack
2, click
Modify advanced settings
, then click the
Wireless Networks
tab and
then click
Add
.
In the following dialog window, enter a name for the network (letters and
numbers without spaces) and then for the network authentication type, select
Open
.
If you would like to encrypt your network, select
WEP
as data encryption and
deactivate the check box
The key is provided for me automatically
. Now enter
a network key.
However, we recommend that you first deactivate the encryption to make it
easier for you to check whether the wireless connection is functioning correctly.
The network key is the "password" for your wireless network. It has to be
entered in hexadecimal format (digits 0 to 9 and letters a to f only). For 64-bit
encryption, the key needs to be made up of exactly ten Hex characters. For 128-
bit encryption, it is 26 Hex characters. Make a note of the key, since you will
also need to enter it in the ShowCenter Player.
21
Summary of Contents for SHOWCENTER
