Pinnacle ShowCenter
Finally, do not forget to activate the check box
This is a computer-to-
computer (ad-hoc) network
and confirm it twice with
OK
. Your PC is now
waiting for a wireless connection with the ShowCenter.
Connecting to an access point (infrastructure mode)
Make sure that your access point is activated and properly configured and that
there is a network connection to the PC which has ShowCenter software
running. If your wireless network uses WEP encryption, you need the WEP key
as a Hex character string for the following.
Wireless network configuration for the ShowCenter Player
Disconnect the Ethernet cable. Select the
Wireless (WiFi)
button in the Server
Selection menu of the ShowCenter Player by selecting it with the arrow buttons
on the remote control and then pressing the
OK
button. Or you can press the
C
button to do this. The ShowCenter Player then performs a reset, scans for
wireless networks, and after a few seconds, displays the results.
In this menu, choose the name (SSID) of your wireless network and press
OK
.
If no network is displayed, check the configuration of your WLAN adapter or
WLAN access point and select
Re-Scan
to perform a new search for wireless
networks.
22
Summary of Contents for SHOWCENTER
