42
Once the alarm is sounding, you can do one of the following:
• Press the
Standby [
�
]
button to turn off the alarm
• Press the
Alarm
[ ]
button to turn off the alarm and continue listening to the music. When
you press the
Alarm
button, the music will stay at the volume level you are hearing when
you press the Alarm button.
• Press the
Snooze
button to quiet the alarm for 7 minutes. You can use the snooze alarm
repeatedly for as long as you like.
Note
: The alarms will sound through SoundBridge Radio’s speakers even if headphones are
plugged in.
Wake-Up Selections
You can choose to wake to any of the 18 presets you have set or a variety of alarm tones. To
make a wake up selection, follow these steps:
1. Hold down the
Alarm [ ]
button for a few seconds to enter into alarm set mode.
2. Use the
Source
[ ]
button to advance to the sound setting on your display. The default
sound setting on your alarm display is Buzzer 1.
3. Use the
Scan Up [ ]
and
Scan Down
[ ]buttons to scroll through the 18
Preset
[
A1–A6,
B1–B6 and C1–C6
] buttons and three buzzer tone selections.
4. Once you find the music or buzzer tone you want for your alarm, press the
Alarm [ ]
button.
Sleep Function
You can set your radio to turn off after a period of time so you can go to sleep with music
playing. You can set the interval of sleep by pressing the Snooze/Sleep button several
times. Once set, your display will show a small clock icon
∏
. When it’s time to shut off, your
SoundBridge Radio will then slowly ramp down in volume and go into Standby. To cancel the
Sleep function, press the Snooze/Sleep button until you see the “Sleep Timer Off” message.
Note
: Because
Sleep
and
Snooze
share the same button on the radio, an alarm sounding will
clear the sleep timer, and SoundBridge Radio can’t enter sleep mode if an alarm is sounding or
snoozing.
Section 10:
Alarm Clock
