Start to play the drum
1. Switch the power ON
After confirming that each of the devices, pads, external devices, etc. are all properly connected, press the
POWER ON/OFF button on the front panel to turn on the unit.
The drum module is ready to operate when the display shown below, for selecting the drum kit and song
appears (Song Mode).
2. Hit a pad
While hitting a pad, slide the MAIN VOLUME switch little by little upward until a comfortable volume
level is reached.
3. Play the DEMO song
Press the [DEMO] button to start the demo song. To stop the demo song, press the [DEMO] button again or
press the [START/STOP] button once.
4. TEMPO
You can adjust the tempo of the songs ranges from 30 to 280.
Press the[TEMPO/TAP] button, you can tap the pad to get the current TEMPO. Tap 4 times and the beat is
just as the interval of last two times you tap. After that the song will be playing at this tempo. At the same time,
you can rotate the Data Dial to adjust the tempo.
When the song is playing, the tapping method will not take effect.
8