3. Velocity Curve
This function sets the MIDI Velocity Curve for the sensitivity for each pad.
In the Utility Mode, press the [PAGE +] button to select the velocity curve setting display shown below:
Velocity Curve
Drum pad number
3.1 Velocity Curve (Velcurve)
Sets the Input Velocity Curve for the trigger input jack assigned in drum pad.
Turn the Data Dial to select the curve (Normal, Loud1, Loud 2, Hard 1, Hard 2).
3.2 UT PAD IN
Assign the drum pad number.
4. Assign Order
This set the pad function that allows the currently selected drum kit number to be increased or decrease
by hitting the specified pad.
In the Utility Mode, press the [PAGE +] button to select the assign order setting display shown below:
4.1 Assign Order
Turn the Data Dial to assign Increment (Inc) or Decrement (Dec).
4.2 UT PAD IN
Assign the drum pad number.
5. Equalizer
In the Utility Mode, press the [PAGE +] button to select the equalizer setting display shown below:
5.1 Low Gain (EQ Lo)
Turn the Data Dial to adjust the low gain level range from (0-12dB).
5.2 High Gain (EQ Hi)
Press the [SELECT] button, then turn the Data Dial to adjust the high gain level rang from (0-12dB).
Utility
23
