15. Local control
ress the [PAGE +] button
In the Utility Mode, p
to select the local control setting display shown below:
Then turn the Data Dial to set the Local Control on or off.
off: MIDI signals triggered by the connected pads is disconnected from the drum brain's tone generator,
there will be no sound produced by the drum brain's tone generator. The drum brain will transmit
MIDI signals from the MIDI out.
On: Normal operation. MIDI signals will be transmitted to the brain's tone generator as well as the
MIDI OUT jacks.
16. MIDI Merge
ress the [PAGE +] button
In the Utility Mode, p
to select the MIDI merge setting display shown below:
Then turn the Data Dial to set the Local Control on or off.
off: MIDI signals triggered by the connected pads is disconnected from the drum brain's tone generator,
there will be no sound produced by the drum brain's tone generator. The drum brain will transmit
MIDI signals from the MIDI out.
On: Normal operation. MIDI signals will be transmitted to the brain's tone generator as well as the
MIDI OUT jacks.
17. Program Change
ress the [PAGE +] button
In the Utility Mode, p
to select the program change setting display shown below:
Then turn the Data Dial to set the receive program on or off.
It is necessary to set the receive parameter to on in the display in order to switch the drum kits from
a song or an external MIDI device
off: Does not receive
On: receives
18. System Exclusive Message
ress the [PAGE +] button
In the Utility Mode, p
to select the system exclusive setting display shown below:
Then turn the Data Dial to set the System Exclusive Message on or off.
This is enables or disables the drum to receive system exclusive messages form all MIDI channels.
off: Does not receive system exclusive messages.
On: Receives system exclusive messages.
Utility
27