background image

 

SAFETY INSTRUCTIONS

 

Basic precautions should always be followed, including the following safety 
instructions when using this equipment: Read all instructions before using this 
equipment. 

 

1.  Read all the instructions in this manual and do warm up exercises before using this 

equipment. 

2.  Before exercise, in order to avoid injuring the muscle, warm-up exercise of every 

position of the body is necessary.    Refer to Warm Up and Cool Down Routine page.   
After exercise, relaxation of the body is suggested for cool-down. 

3.  Please make sure all parts are not damaged and fixed well before use.    This 

equipment should be placed on a flat surface when using.    Using a mat or other 
covering material on the ground is recommended. 

4.  Please wear proper clothes and shoes when using this equipment; do not wear clothes 

that might catch any part of the equipment. 

5.  Do not attempt any maintenance or adjustments other than those described in this 

manual.    Should any problems arise, discontinue use and consult an 

Authorized 

Service Representative.

 

6.  Do not use the equipment outdoors. 
7.  This equipment is for household use only. 
8.  Only one person should be on the equipment while in use. 
9.  Keep children and pets away from the equipment while in use.    This machine is 

designed for adults only.    The minimum free space required for safe operation is not 
less than two meters. 

10.  If  you  feel  any  chest  pains,  nausea,  dizziness,  or  short  of  breath,  you  should  stop 

exercising immediately and consult your physician before continuing. 

11.  The maximum weight capacity for this product is 120kgs. 
 

WARNING:

 

Before beginning any exercise program consult your physician.   

This is especially important for the persons who are over 35 years old or who have 
pre-existing health problems.    Read all instructions before using any fitness 
equipment.

 

 

CAUTION:

 Read all instructions carefully before operating this product.     

Retain this Owner’s Manual for future reference. 
 

 

Summary of Contents for MAGNETIC X-Bike













Reviews: