3
ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin.
Pull the ball pin out to expand the main frame, and then
2. Install the Front and Rear Stabilizers.
Loose the screws in the stabilizer, and insert them into the
corresponding grooves and tighten in each stabilizer.
3. Install the Left and Right Pedals.
Attach the left/right pedal onto corresponding axles (left
pedal with left-hand thread, right pedal with right-hand
thread).
4. Install the Back Handlebar
Open up support frame hinge and insert seat handlebar.
Make sure notch is on handle bar is facing away from
seat. Secure in place using bolt and allen key.