En
33
Using
the
DJ
software
Using the DJ software
Operating the DJ software
This unit outputs the operation information of buttons and controls, etc.
in universal MIDI or HID format. When connected by a USB cable to a
computer on which a MIDI- or HID-compatible DJ software program is
installed, the DJ software can be operated from this unit. The sound of
the music file that is playing on the computer can be output from this
unit.
To use this unit as an audio device, install the driver software on the
computer beforehand (p. 32 ). This unit must also be selected in the DJ
software’s audio output device settings. For details, see your DJ soft-
ware’s operating instructions.
1 Connect the USB port on this unit to your computer.
For instructions on connecting, see
Using the DJ software
on page 11 .
2 Touch [BROWSE (SEARCH)], and then touch [LINK].
[
CONTROL MODE
] and [
USB MIDI
] are displayed on menu screen.
3 Select [CONTROL MODE] and enter.
The connecting screen is displayed.
4 Select [USB MIDI] and enter.
This unit switches to the control mode.
5 Launch the DJ software.
Communication with the DJ software starts.
!
The DJ software on the computer can be operated using the buttons
and rotary selector on this unit.
!
It may not be possible to use some buttons to operate the DJ
software.
!
The control mode is canceled when a track is loaded in this unit.
!
For messages output by this unit, see
List of MIDI Messages
on
page 33 .
Changing the MIDI channel setting
This operation is not necessary if the operation information is output in
HID format.
1 Touch [MENU (UTILITY)] for over 1 second.
The [
UTILITY
] screen is displayed.
2 Select [MIDI CHANNEL] and enter.
3 Turn the rotary selector.
Select the MIDI channel and change the setting. A setting from 1 – 16
can be selected.
4 Press the rotary selector to enter.
5 Touch [MENU (UTILITY)].
The previous screen reappears.
List of MIDI Messages
SW Name
SW
Type
MIDI Messages
Notes
MSB
JOG (TOUCH) —
Bn
10
dd
A linear value corresponding
to the speed, from stop to 4X:
64 for stop, 65 (0.06X) – 127
(4X) in the forward direction,
63 (0.06X) – 0 (4X) in the
reverse direction.
TEMPO
SLIDER
VR
Bn
1D
dd
0 – 127, 0 on the – side, 127
on the + side
JOG RING
—
Bn
30
dd
A linear value corresponding
to the speed from 0.5X to
4X: 64 when stopped (under
0.49X), 65 (0.5X) to 127 (4X)
in the forward direction, 63
(0.5X) to 0 (4X) in the reverse
direction.
ROTARY
SELECTOR
General
Purpose
Controller
Bn
4F
dd
98 – 127, 1 – 30 Difference of
count from previous time is
sent (±1 – ±30) When over
±30, set at ±30
PLAY/PAUSE
SW
9n
00
dd
OFF=0, ON=127
CUE
SW
9n
01
dd
OFF=0, ON=127
SEARCH
FWD
SW
9n
02
dd
OFF=0, ON=127
SEARCH REV SW
9n
03
dd
OFF=0, ON=127
TRACK
SEARCH
NEXT
SW
9n
04
dd
OFF=0, ON=127
TRACK
SEARCH
REV
SW
9n
05
dd
OFF=0, ON=127
LOOP IN
SW
9n
06
dd
OFF=0, ON=127
LOOP OUT
SW
9n
07
dd
OFF=0, ON=127
RELOOP
SW
9n
08
dd
OFF=0, ON=127
QUANTIZE
GUI button 9n
09
dd
OFF=0, ON=127
MEMORY
GUI button 9n
0A
dd
OFF=0, ON=127
CALL NEXT
GUI button 9n
0B
dd
OFF=0, ON=127
CALL PREV
GUI button 9n
0C
dd
OFF=0, ON=127
DELETE
GUI button 9n
0D
dd
OFF=0, ON=127
TIME/A.CUE
GUI button 9n
0E
dd
OFF=0, ON=127
TEMPO
RANGE
SW
9n
10
dd
OFF=0, ON=127
MASTER
TEMPO
SW
9n
11
dd
OFF=0, ON=127
JOG MODE
SW
9n
12
dd
OFF=0, ON=127
HOT CUE A
GUI button 9n
18
dd
OFF=0, ON=127
HOT CUE B
GUI button 9n
19
dd
OFF=0, ON=127
HOT CUE C
GUI button 9n
1A
dd
OFF=0, ON=127
HOT CUE
REC
GUI button 9n
1C
dd
OFF=0, ON=127
HOT CUE
CALL
GUI button 9n
1D
dd
OFF=0, ON=127
MASTER
GUI button 9n
1E
dd
OFF=0, ON=127
SYNC
GUI button 9n
1F
dd
OFF=0, ON=127
JOG TOUCH
SW
9n
20
dd
OFF=0, ON=127
REVERSE
GUI button 9n
21
dd
OFF=0, ON=127
VINYL BRAKE GUI button 9n
22
dd
OFF=0, ON=127
BEAT LOOP
1/2
GUI button 9n
27
dd
OFF=0, ON=127
BEAT LOOP 1 GUI button 9n
28
dd
OFF=0, ON=127
BEAT LOOP 2 GUI button 9n
29
dd
OFF=0, ON=127
