Additional Information
En
17
Understanding built-in CD player
error messages
When problems occur during CD play an error
message may appear on the display. If an error
message appears on the display refer to the
table below to see what the problem is and the
suggested method of correcting the problem. If
the error cannot be corrected, contact your
dealer or your nearest Pioneer Service Center.
Message
Cause
Action
ERROR-11, 12,
17, 30
Dirty disc
Clean disc.
ERROR-11, 12,
17, 30
Scratched disc
Replace disc.
ERROR-14
Blank disc
Check the disc.
ERROR-10, 11,
12, 14, 17, 30,
A0
Electrical or
mechanical
Turn the ignition
ON and OFF, or
switch to a
different source,
then back to the
CD player.
HEAT
CD player over-
heated
Turn off the CD
player until the
CD player cools
down.