PDP-433PU
60
1
2
3
4
1
2
3
4
C
D
F
A
B
E
6. ADJUSTMENT
6.1 SERVICE FACTORY MODE
Remote Control Unit Operation in The Service Factory Mode
Operate the service factory mode with the remote control unit (AXD1463, AXD1460 or AXD1471) supplied with the Media
Receiver.
Please perform the adjustment using the following keys.
Service factory mode uses an OSD function of the Media Receiver (PDP-R03E, PDP-R03U or PDP-R03G).
Perform the adjustment and setting when the Media Receiver is connected with this unit.
Service Factory mode cannot be used if the Media Receiver is not connected with the Plasma Display.
Keys on the
Remote
Control Unit
Functions
P + key
Each press of the key moves the adjustment-item-selection cursor
up by one line.
P – key
Each press of the key moves the adjustment-item-selection cursor
down by one line.
VOL + key
Each press of the key increases the adjustment value by one.
VOL – key
Each press of the key decreases the adjustment value by one.
5
key
Each press of the key moves one page backward (previous page).
∞
key
Each press of the key moves one page forward (next page).
2
key
Each press of the key decreases the adjustment value by 10.
3
key
Each press of the key increases the adjustment value by 10.
"P +" key
"P –" key
* "0" key
* : Refer to
"6.1.1 How to
Enter Service
Factory Mode".
* "MENU"
key
* "ENTER"
key
"
5
" key
"
∞
" key
"
2
" key
"
3
" key
"VOL +" key
"VOL –"
key
"P +" key
"P –" key
* "0" key
* : Refer to
"6.1.1 How to
Enter Service
Factory Mode".
* "MENU"
key
* "ENTER"
key
"
5
" key
"
∞
" key
"
2
" key
"
3
" key
"VOL +"
"VOL –"
key
