The Video Adjust menu
14
149
En
Chapter 14
The Video Adjust menu
Using the Video Adjust menu you can set up the picture
quality for the built-in tuner and external input, for disc
playback, and for recording.
Setting the picture quality for TV and
external input
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner
1
and for the external
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
1
With the recorder stopped, press to display
the Home Menu.
2
Select ‘Video Adjust’.
3
Select a preset.
• Use the
INPUT
button
(LCD page 2)
to switch between
the built-in TV tuner and the external input.
• Use the
CH +/–
buttons
(LCD page 2)
to change the
channel of the built-in TV tuner.
There are six presets available:
•
Tuner
– suitable for general TV broadcasts
•
VCR
– suitable for video cassettes
•
DTV/LDP
– suitable for digital broadcasts and
Laserdiscs
•
Memory1
– user preset 1
•
Memory2
– user preset 2
•
Memory3
– user preset 3
You can press
DISPLAY
to see the individual settings for
the current preset (
Tuner
,
VCR
or
DTV/LDP
).
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1
Follow
Choosing a preset
above and select one of
the user presets (Memory 1, 2 or 3).
2
Select ‘Detailed Settings’.
3
Select the setting you want to adjust.
You can adjust the following settings:
•
Prog. Motion
– Adjusts the motion and still picture
quality when video output is set to progressive.
•
PureCinema
– This setting optimizes the picture for
film material when the video output is set to
progressive. Usually set to
Auto
; but try switching to
Off
if the picture appears unnatural.
•
3-D Y/C
– Adjusts the brightness/colour separation.
•
YNR
– Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
•
CNR
– Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
•
Detail
– Adjusts how sharp edges appear.
•
White AGC
– Turn on for automatic white level
adjustment.
•
White Level
– Adjusts the intensity of white.
•
Black Level
– Adjusts the intensity of black.
Note
1 When an HDMI component is not connected, the settings for the digital tuner cannot be changed.
HOME
MENU
SETUP
ENTER
ENTER
Detailed Settings
Pr 1
Tuner
ENTER
Detailed Settings
Pr 1
Memory1
ENTER
Memory1
3-D Y/C
Motion
Still
PureCinma
Prog. Motion
Auto
Motion
Still
Pr 1
Detail
CNR
YNR
White AGC
Off
Max
Off
Off
Max
Max
Off
02SDVRLX70D_EN.book 149 ページ ２００８年１０月９日 木曜日 午後４時３８分
