Recording
06
99
En
Stopping a timer recording
1
(LCD page 1)
Press during a timer recording.
2
Select ‘Yes’ to confirm.
Preventing use of the recorder before a timer
recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
1
If the recorder is on, switch it into standby.
2
[Front panel] Press and hold for three
seconds to lock the controls.
The front panel display briefly shows
LOCKED
. If any
buttons are pressed on the remote or front panel,
LOCKED
is briefly displayed again.
• To unlock the recorder, press and hold
(Stop) on
the front panel (while the recorder is stopped) for
three seconds until the display shows
UNLOCKED
.
• Even if you make child lock settings, this recorder can
still be controlled by the remote of a connected Flat
Screen TV. If you do not want this unit to be able to be
controlled by another component when you have set
a child lock, turn this recorder’s
HDMI Control
to
Off
(page 159).
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder doesn’t start
recording!
Check that the disc loaded or HDD is recordable, not
locked (see
Lock Disc
on page 147), and that there are
fewer than 99/999 titles already on the DVD/HDD.
• The recorder won’t let me enter a timer programme!
Why not?
You can’t enter a timer programme if the clock isn’t
set.
• What happens when two or more timer programmes
overlap?
Basically, the programme with the earlier recording
start time has priority. However, the recorder will
start recording the programme with the later start
time after the earlier programme is finished.
If schedule to record two programmes have the same
times (but different channels, for example), then only
one of the two programmes will be recorded. In this
event you should cancel the scheduled recording of
the lesser important programme. If one of the
overlapping programmes is a regular timer
programme for a digital broadcast, you may choose
‘Cancel Once’
in order to avoid having it overlap with
a separately scheduled programme (see
Skipping a
regular timer programme
on page 89).
STOP
REC
ENTER
OFF
STOP
02SDVRLX70D_EN.book 99 ページ ２００８年１０月９日 木曜日 午後４時３８分
