Black plate (35,1)
5
Dashboard or console
Installing the microphone
(Function of AVH-265BT)
CAUTION
It is extremely dangerous to allow the micro-
phone lead to become wound around the steer-
ing column or shift lever. Be sure to install the
unit in such a way that it will not obstruct driv-
ing.
Notes
!
Install the microphone in a position and ori-
entation that will enable it to pick up the
voice of the person operating the system.
!
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
When installing the microphone
on the sun visor
1
Fit the microphone lead into the groove.
1
2
1
Microphone lead
2
Groove
2
Install the microphone clip on the sun
visor.
With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)
1
1
Microphone clip
When installing the microphone
on the steering column
1
Detach the microphone base from the mi-
crophone clip.
To detach the microphone base from the micro-
phone clip, slide the microphone base.
1
2
3
1
Microphone
2
Microphone clip
3
Microphone base
2
Install the microphone on the steering
column.
1
2
1
Double-sided tape
2
Install the microphone on the rear side of the
steering column.
Adjusting the microphone angle
English
Installation
35
Section
Installation
En
20
<YRD5381-B>35