En
g
lis
h
- 33 -
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.
NOTES
•
Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
•
Do not turn off the engine while saving the adjusted position data.
•
This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
[Steering Wheel Control]
Menu Item
Description
[Steering Wheel Control]
[With Adapter] [No
Adapter]
Select [With Adapter] or [No Adapter] according to your
wired remote control.
NOTES
•
This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
•
Depending on your vehicle, this function may not work properly.
In this case, contact your dealer or an authorised PIONEER
Service Station.
•
Please use a PIONEER wiring harness for each car model when
[With Adapter] mode is engaged, otherwise select [No Adapter].
[Restore Settings]
Menu Item
Description
[Restore Settings]
Touch [Restore] to restore the settings to the default
settings.
CAUTION
Do not turn off the engine while restoring the settings.
NOTES
•
This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
•
The source is turned off and the Bluetooth connection is
disconnected before the process starts.
[Beep Tone]
Menu Item
Description
[Beep Tone]
[On] [Off]
Select [Off] to disable the beep sound when the button is
pressed or the screen is touched.
[Touch panel calibration]