If you cannot open the connection between
your Bluetooth device and this unit from your
Bluetooth device, you can use this function to
establish a connection.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Special Device to select the spe-
cial device.
#
Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.
3
Touch the special device list to open the
connection.
This unit is now on standby for a connection
with the Bluetooth device.
#
If five devices are already paired,
Memory Full
is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to
4
Use your Bluetooth device to establish
a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a con-
nection.
While connecting,
Pair your phone
is dis-
played. If the connection is established,
Paired
is displayed.
#
If the connection fails,
Connection Error
is
displayed. In such cases, try again from the be-
ginning.
#
The PIN code is set to
0000
as the default, but
can be changed. Refer to
Connecting to a Bluetooth
device automatically
(Function of AVH-P3250BT)
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Auto Connect to turn automatic
connection on.
If your Bluetooth device is ready for a Blue-
tooth wireless connection, a connection to
this unit will automatically be established.
#
To turn automatic connection off, touch
Auto Connect
again.
3
Turn your vehicle's ACC switch off and
on.
Switching visible unit
(Function of AVH-P3250BT)
This function sets whether or not to make this
unit visible to the other device.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Visibility to select visibility off.
!
To turn visibility on, touch
Visibility
again.
Displaying BD (Bluetooth
Device) address
(Function of AVH-P3250BT)
En
42
Section
12
Detailed instructions
Summary of Contents for AVH-P3250BT
Page 1: ...Operation Manual DVD AV RECEIVER AVH P4250DVD AVH P3250DVD AVH P3250BT English ...
Page 94: ...En 94 ...
Page 95: ...En 95 ...