This unit displays its BD address.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch Bluetooth Version to select de-
vice information.
The BD address is displayed.
Entering PIN code for
Bluetooth wireless connection
(Function of AVH-P3250BT)
To connect your Bluetooth device to this unit
via Bluetooth wireless technology, you need to
enter a PIN code on your Bluetooth device to
verify the connection. The default code is
0000
, but you can change it with this function.
1
Display the Bluetooth Connection
Menu.
Refer to
Introduction of Bluetooth telephone op-
2
Touch PIN Code Input to select
PIN code input.
3
Touch 1 to 0 to input pin code.
4
After inputting PIN code (up to 8 di-
gits), store in this unit.
Storing the PIN code in this unit.
Using a cellular phone to
initiate a connection
(Function of AVH-P4250DVD/AVH-P3250DVD)
A Bluetooth wireless connection can be estab-
lished from your phone by putting the unit into
initiating a connection mode.
You may need to refer to the operation manual
that came with your phone if you are unsure
how to initiate a connection from your phone.
1
Put the unit in initiating a connection
mode.
Refer to
Introduction of Bluetooth telephone op-
2
Use a cellular phone to connect to this
unit.
#
Operation varies depending on the type of cel-
lular phone.
#
You may need to enter the link code on your
cellular phone to complete the connection.
Registering a connected
cellular phone
(Function of AVH-P4250DVD/AVH-P3250DVD)
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with Blue-
tooth wireless technology. A total of five
phones can be registered: three user cellular
phones and two guest phones. All possible
functions are available for user phones, while
some functions are limited for guest phones.
1
Start registering a connected cellular
phone.
Refer to
Introduction of Bluetooth telephone op-
2
Touch and hold one of the registration
assignments to register the currently con-
nected phone.
Select from the following:
1
(user 1)
—
2
(user 2)
—
3
(user 3)
—
G
(guest 1)
—
G
(guest 2)
If registration is successful, the device name
of the connected phone is displayed in the se-
lected assignment.
#
If the assignment is already taken, the device
name will be displayed. To replace an assignment
with a new phone, first delete the current assign-
ment.
En
43
Section
12
Detailed
instructions
Detailed instructions
Summary of Contents for AVH-P3250BT
Page 1: ...Operation Manual DVD AV RECEIVER AVH P4250DVD AVH P3250DVD AVH P3250BT English ...
Page 94: ...En 94 ...
Page 95: ...En 95 ...