Shows when a phone connection using Blue-
tooth wireless technology is established (for
more details, refer to
Connecting a cellular
phone
on the next page).
!
While connecting automatically, tele-
phone indicator is flashing.
%
Touch the source icon and then touch
TEL to select the telephone.
Note
Equalizer curve for the phone source is fixed.
When selecting the phone source, you cannot op-
erate the equalizer function. Refer to
Recalling
equalizer curves
on page 37.
When the multi-channel processor is connected
to this unit, you can operate the equalizer func-
tion even when selecting the phone source. Refer
to
Recalling equalizer curves
on page 75.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1
Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to
Connecting a cellular phone
on
the next page.
#
Your phone should now be temporarily con-
nected. However, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2
Registration
To register your temporarily connected phone,
refer to
Registering a connected cellular phone
on page 59.
3
Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
#
Caller
’
s voice volume and ring volume may
vary depending on the type of cellular phone.
#
If the difference between the ring volume and
caller
’
s voice volume is big, overall volume level
may become unstable.
#
Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Making a phone call
Voice recognition
1
Touch VOICE to turn the voice recogni-
tion function on.
Voice dial icon appears on the information bar.
Voice recognition function is now ready.
#
To cancel the voice recognition function,
touch
VOICE
again.
2
Pronounce the name of your contact.
Taking a phone call
Answering an incoming call
1
When a call comes in, touch
.
#
You can also perform this operation by press-
ing
–
(
TRACK
).
#
If private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
2
To end the call, touch
.
#
You can also perform this operation by press-
ing
+
(
TRACK
).
Rejecting an incoming call
%
When a call comes in, touch
.
The call is rejected.
Available accessories
En
57
Section
04
A
vailable
accessories
