3
Touch the Display Tilt keys to adjust the
LCD panel to an easily viewable angle.
Laying the panel down.
Returning the panel to the upright
position.
#
As the set angle is saved, the LCD panel will
automatically be adjusted to the same position
the next time the LCD panel is opened.
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch DT.WARNING to turn the warn-
ing tone on.
#
To turn the warning tone off, touch
DT.WARNING
again.
Setting the rear view camera
(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (
REAR
VIEW CAMERA IN
) when a rear view camera
is installed on your car and the gear shift is
moved to the
REVERSE (R)
position. (For
more details, consult your dealer.)
!
After you set up the rear view camera set-
ting, move the gear shift to
REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
!
Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
!
To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE
/
.
!
Touch the
RearView
source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to
lecting a source using the touch panel keys
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Camera Polarity on the system
menu to select the appropriate setting.
!
Battery
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
Ground
–
When the polarity of the con-
nected lead is negative while the gear shift
is in
REVERSE (R)
position
!
Off
–
When a rear view camera is not con-
nected to this unit
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
!
As this function is initially set to
Auto
, the
unit will automatically adjust the video sig-
nal setting.
En
63
Section
14
Menu
operations
Menu operations