+6
6
is displayed as the level is increased
or decreased.
5 Touch
b
and then touch
c
or
d
to se-
lect the desired frequency.
Touch
c
or
d
until the desired frequency ap-
pears in the display.
Low:
40
80
100
160
(Hz)
Mid:
200
500
1k
2k
(Hz)
High:
3.15k
8k
10k
12.5k
(Hz)
6 Touch
b
and then touch
c
or
d
to se-
lect the desired Q factor.
Touch
c
or
d
until the desired Q factor ap-
pears in the display.
2W
1W
1N
2N
Note
If you make adjustments,
CUSTOM
curve is up-
dated.
Adjusting bass and treble
You can adjust bass and treble settings.
!
If EQ-EX function has been selected and
only when EQ-EX is turned on and
CUSTOM
is selected as the equalizer
curve, you can adjust bass and treble set-
tings. (Refer to
Adjusting bass
You can adjust the cut-off frequency and the
bass level.
!
If SFEQ has been set to
FRONT1
, bass ad-
justment affects only the rear output: front
output cannot be adjusted. (Refer to
the sound focus equalizer (SFEQ)
on page
73.)
1 Touch A.MENU and AUDIO and then
touch BASS.
2 Touch
c
or
d
to select the desired fre-
quency.
Touch
c
or
d
until the desired frequency ap-
pears in the display.
40
63
100
160
(Hz)
3 Touch
a
or
b
to adjust the bass level.
Each time you touch
a
or
b
increases or de-
creases the bass level.
+6
6
is displayed as
the level is increased or decreased.
Adjusting treble
You can adjust the cut-off frequency and the
treble level.
!
If SFEQ has been set to
FRONT1
or
FRONT2
, treble adjustment affects only the
front output: rear output cannot be ad-
justed. (Refer to
1 Touch A.MENU and AUDIO and then
touch TREBLE.
2 Touch
c
or
d
to select the desired fre-
quency.
Touch
c
or
d
until the desired frequency ap-
pears in the display.
2.5k
4k
6.3k
10k
(Hz)
3 Touch
a
or
b
to adjust the treble level.
Each time you touch
a
or
b
increases or de-
creases the treble level.
+6
6
is displayed as
the level is increased or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
Audio Adjustments
En
70
Section
15