Setting the sound focus
equalizer (SFEQ)
Clarifying the sound image of vocals and in-
struments allows the simple staging of a nat-
ural, pleasant sound environment. Even
greater listening enjoyment will be obtained if
seating positions are chosen carefully.
FRONT1
boosts the treble on the front output
and the bass on the rear output.
FRONT2
boosts the treble and the bass on the front out-
put and the bass on the rear output. (The bass
boost is the same for both front and rear.) For
both
FRONT1
and
FRONT2
,
H
setting provides
a more pronounced effect than
L
setting.
!
You cannot use EQ-EX function and SFEQ
function simultaneously.
1 Touch A.MENU and AUDIO and then
touch NEXT.
2 Touch SFEQ/EQ-EX and then touch
SFEQ.
3 Touch
a
or
b
to select the desired SFEQ
setting.
Touch
a
or
b
repeatedly to switch between
the following settings:
SFEQ OFF
(off)
FRONT1-H
(front 1-high)
FRONT1-L
(front 1-low)
FRONT2-H
(front
2-high)
FRONT2-L
(front 2-low)
CUSTOM
(custom)
4 Touch
c
or
d
to select the desired posi-
tion.
Touch
c
or
d
until the desired position ap-
pears in the display.
LEFT
(left)
CENTER
(center)
RIGHT
(right)
Notes
!
If you adjust the bass or treble,
CUSTOM
memorizes an SFEQ setting in which the bass
and treble are adjusted for personal prefer-
ence.
!
If you switch the SFEQ setting, the HPF func-
tion is automatically turned off. By turning the
HPF function on after selecting the SFEQ set-
ting, you can combine HPF function with
SFEQ function.
Audio Adjustments
En
73
Section
15
Audio
Adjustments
