1 Touch A.MENU and INITIAL and then
touch DT. WARNING.
2 Touch
a
to turn warning tone on.
#
To turn warning tone off, touch
b
.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Touch A.MENU and INITIAL and then
touch AUX.
2 Touch
a
to turn auxiliary setting on.
#
To turn auxiliary setting off, touch
b
.
Selecting the illumination
color
This unit is equipped with two illumination col-
ors, green and red. You can select the desired
illumination color.
1 Touch A.MENU and INITIAL and then
touch ILLUMI.
2 Touch
a
or
b
to select the desired illu-
mination color.
Touch
a
to select
GREEN
(green). Touch
b
to
select
RED
(red).
Setting the rear output and
subwoofer controller
This unit
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
REAR SP FULL
) or subwoofer
(
REAR SP SUB. W
) connection. If you switch
the rear output setting to the
REAR SP SUB. W
, you can connect a rear