18
English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
• When installing in a shallow space,
use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Fig. 18
*2 If the screw holes of the bracket and the
screw holes of this unit are not aligned, use a
file to widen the screw holes of the bracket to
match up the screw holes on this unit.
Tighten the screws at 2 places on each side.
Fig. 19
Installing the remote control unit
When not using the remote control
unit, secure it with velcro tape to pre-
vent it from moving.
• Thoroughly wipe off the surface
before affixing the velcro tape.
Fig. 20
Velcro tape (small)
(hard)
Velcro tape (small)
(soft)
Remote control
unit
Screw
Dashboard or
Console
Factory radio mounting
bracket
*2
*1
Conceal tape
