< CRD4846-A >
English
7
En
2 Wrap the lock tie around the hook
above the HDMI port and the High
Speed HDMI
®
Cable, and then
tighten it to secure the High Speed
HDMI
®
Cable.
1
2
3
1
Hook
2
Lock tie
3
High Speed HDMI
®
Cable
p
Do not tighten up the lock tie more than
necessary.
Connecting a rear view
camera
When this product is used with a rear view
camera, it is possible to automatically
switch from the video to rear view image
when the shift lever is moved to
REVERSE
(
R
).
Camera View
mode also allows you to
check what is behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
The screen image may appear reversed.
The rear view camera is used as an aid to
keep an eye on trailers, or backing into a
tight parking spot. Do not use this func-
tion for entertainment purposes.
Objects in rear view may appear closer or
more distant than in reality.
Please note that the image area shown
by the rear view camera may differ
slightly when full-screen images are
displayed when backing and when
checking the rear of the vehicle while
moving forward.
Rear view camera
(ND-BC6)
(sold separately)
This product
Brown (BC IN)
RCA cable
(supplied with ND-BC6)
Violet/white
(REVERSE-GEAR SIGNAL
INPUT)
To video output
Power cord
Power supply
For more details about the wiring, refer to
Connecting the power cord on page 3.
Notes
This mode is available when the rear
view camera setting is set to “
On
”. (For
details, refer to Operation Manual.)
Connect this product to the rear view
camera only. Do not connect to any other
equipment.
Connecting the external video
component
■
Using AV input
To video output
To audio outputs
External video
component
(sold separately)
This product
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
Yellow
(VIDEO INPUT)
23 cm
15 cm
Note
This mode is available when the setting of
AV input is set to “
On
”. (For details, refer to
Operation Manual.)
■
Using an AUX input
To video output
To audio outputs
External video
component
(sold separately)
This product
Red, white
RCA cables
(sold separately)
Yellow
AUX input
Mini-jack AV cable
(CD-RM10)
(sold separately)
Notes
This mode is available when the setting
of AUX input is set to “
On
”. (For details,
refer to Operation Manual.)
When connecting an external video com-
ponent using a mini-jack AV cable, use a
separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-
RM10) (sold separately) for wiring. If you use
other cables, the wiring position might differ
resulting in disturbed images and sounds.
OK
G
V
R
L
G
R
V
L
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Earth
CRD4846-A̲7
Summary of Contents for AVH-X8700BT
