Plugging and unplugging a USB
storage device
p
This product may not achieve optimum per-
formance with some USB storage devices.
p
Connection via a USB hub is not possible.
p
A USB cable is required for connection.
Plugging in a USB storage device
%
Plug a USB storage device into the USB
cable.
2
1
1
USB cable
2
USB storage device
Unplugging a USB storage device
%
Pull out the USB storage device after
checking that no data is being accessed.
Startup and termination
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2
Turn off the vehicle engine to termi-
nate the system.
This product is also turned off.
On first-time startup
When you use this product for the first time,
select the language that you want to use.
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
The
“
Select Program Language
”
screen ap-
pears.
2
Touch the language that you want to
use on screen.
3
Touch the following key.
Displays the
“
Smartphone Setup
”
screen.
4
Touch the item you want to set.
=
For details, refer to
nections and functions for each device
5
Touch the following key.
Displays the Top menu screen.
#
If you touch
, the display returns to the pre-
vious screen.
Regular startup
%
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p
The screen shown will differ depending on
the previous conditions.
p
Enter the password for the anti-theft func-
tion if the password entry screen appear-
s.
Turning off the display
You can turn off the display at night or when
the screen is too bright.
Engb
18
Chapter
02
Basic operation