8
Radio
Storing the strongest stations
BSM (best stations memory) automatically stores the six
strongest stations in the order of their signal strength.
Storing broadcast frequencies with BSM may replace broadcast
frequencies you have saved using the preset tuning keys.
1. Touch [
].
2. Touch [ BSM ] to begin a search.
The six strongest broadcast frequencies will be stored under
preset tuning keys in order of their signal strength.
• To cancel the storage process, touch any key on the screen.
Manual store
1. Tune to a station.
2. Touch and hold one of the channels 1 to 6 to save the
selected band.
Search Stations Automatically
1. Touch [BSM] to search and store stations.
2. The unit will scan play the preset stations automatically.
3. To cancel, touch any key on the user interface.
Recalling a station
1. Select a band (if needed).
2. T o u c h a n o n - s c r e e n p r e s e t b u t t o n t o s e l e c t t h e
corresponding stored station.
Displays the preset channel list
If you touch the [ ] to display the preset channel list.
Local/Distance
Select Local to receive only stations with extremely strong
signal.
1. Touch [Local/Distance] in Radio settings menu of System
setup.
• How to enter Radio Setting, please refer to the System
setting page 14.
2. T o u c h [ L o c a l / D i s t a n c e ] t o s w i t c h " L o c a l " o r
"Distance"(default).
Setting the FM tuning step
You can switch the seek tuning step for FM band.
• The tuning step remains at 50 kHz during manual tuning.
1. Touch [FM Step] in Radio settings menu of System setup to
select the FM tuning step.
• How to enter Radio Setting, please refer to the System
setting page 14.
2. Touching FM step will switch the FM tuning step between 50
kHz and 100 kHz(default). The selected FM tuning step will
appear.
Setting the AM tuning step
You can switch the seek tuning step for AM band.
1. Touch [AM Step] in Radio settings menu of System setup to
select the AM tuning step.
• How to enter Radio Setting, please refer to the System
setting page 14.
2. Touching AM Step will switch the AM tuning step between 9
kHz (default) and 10 kHz. The selected AM tuning step will
appear in the display.
When the setting is changed, the frequency and preset
channels are initialized.
Select radio as playing source
Touch [Radio] on the source menu to the radio mode.
Select one radio band
Press the BAND button on the remote control or touch the [FM1]
/ [AM] icon on the user interface to select one radio band among
FM1, FM2, FM3, and AM.
Tune
Auto tuning
Press and hold the
/
button on the remote control or
touch and hold the [ ] / [ ] icon on the user interface to
seek a higher / lower station.
To stop searching, repeat the operation above or press other
keys having radio functions.
Note:
When a station is received, searching stops and the station is
played.
Manual tuning
During manual tuning, the frequency will be changed in steps.
Press the
/
button on the remote control or touch the
[ ] / [ ] icon on the user interface to tune in a higher / lower
station.
Preset station
The unit has 4 bands, such as FM1, FM2, FM3 and AM, and
each band can store 6 stations; hence the unit can store 24
stations in total.
