Pioneer AVIC-880DVD, Hardware Manual

8

Chapter 1

How to Use Remote Control and Names of Parts

Setting and removing the disc

Insert the disc in the Disc loading slot with the 
label-side up. To remove the disc, press the Disc 
eject button on the right-hand side of the Disc 
loading slot.

❒

Do not try to use discs other than a disc 
designed for this system. Please use only the 
disc specified by Pioneer.

Setting the PC card

Open the cover at the front of the main unit. Hold 
the PC card label-side up: the arrow shows the 
direction of insertion. Insert the card firmly until 
the PC card eject button pops out. If the main 
unit power is on, the PC card lock lamp changes 
from green to red, showing that the PC card is 
inserted correctly and ready for use.

Removing the PC Card

• Do not remove the PC card while the PC 

card lock lamp is red. It may damage the 
main unit of the Navigation System or the 
PC card.

Open the cover on the front of the main unit. 
Slide the PC card lock lever to the right (1), and 
hold it there. Check that the PC card lock lamp 
has changed to green, and then press the PC 
card eject button (2). (Keep holding the PC card 
lock lever to the right until the PC card is 
removed completely.)

❒

PC card can be set or removed regardless of 
the power ON/OFF of the main unit (ON/OFF 
of the engine).

❒

You can only use a card that conforms to the 
PCMCIA Type II (5V) standard. If you attempt 
to use a card complying with a different stan-
dard, the card slot may be damaged, or a mal-
function may occur.

❒

Do not remove the card while editing the data 
on the PC card. The data stored on the Navi-
gation unit and data on the PC card could be 
corrupted.

(1)

(2)