Pioneer AVIC-880DVD, Hardware Manual

5

Chapter 1

How to Use Remote Control and Names of Parts

Chapter

 1

How to Use Remote Control and Names of Parts

Preparing the Remote Control

Some navigation operations can be performed 
with the Steering Remote Control provided.
Prior to using the remote control, refer to the fol-
lowing to install the battery.

Inserting the battery for the 
Remote Control

The CR2032 (3V) lithium battery is used with the 
remote control.

Steering Remote

When using the remote control for the first 
time:

Pull out the film in between the cover and the 
remote control.

When replacing the battery with a new one:

Remove the cover on the back of the remote con-
trol and insert the lithium battery with the posi-
tive side (+) up. When changing the battery, use 
a probe with a fine non-metallic tip to remove the 
lithium battery.

• Keep the lithium battery out of reach of 

children. Should the battery be swallowed, 

immediately consult a doctor.

• Do not recharge, disassemble, heat or dis-

pose of the battery in fire.

• Use a CR2032 (3V) lithium battery only. 

Never use other types of battery with this 
unit.

• Do not handle the battery with metallic 

tools.

• Do not store the lithium battery with 

metallic materials.

• When disposing of used batteries, please 

comply with governmental regulations or 
environmental public institution’s rules 
that apply in your country/area.

• Always check carefully that you are load-

ing the battery with its (+) and (–) poles 
facing in the proper directions.

• Remove the battery if remote control is not 

to be used for a month or longer.

• In the event of battery leakage, wipe the 

remote control completely clean and 

install a new battery.