Pioneer AVIC-9DVD Operation Manual Download

Page: 64 / 160

If you stray from the route

If, for any reason, you stray from the suggested route, you can automatically search the route
to get back on track. This function is called “Auto Reroute”, and you can set it On or Off in
the Settings menu. For details, see Chapter 6.

➲

If “Auto Reroute” is set “Off” and the display is in mode except “Map mode”, when you
stray from the route, the display automatically switches to “Map mode” and a map of your
surroundings appears. When you return to the suggested route, the display returns to each
mode, and route guidance restarts.

➲

If the new route requires you to travel in the opposite direction to your current heading,
guidance informing you that you need to turn around to get back to the route is displayed.

➲

If you stray from the route being guided, and enter a new street not recorded in the disc,
the Navigation System automatically switches to “Map mode”.

➲

On some of the streets you are driving, “Auto Reroute” may not work,

see “Route Setting

Information” on page 143

If you stop during the route guidance

If you stop at a gas station, or a restaurant during the route guidance, your Navigation System
remembers your destination and route information. When you start your car engine again, the
route guidance resumes from your current location.

If you parked off the set route, the route guidance resumes when you return to the set route.
Also the estimated time of arrival or travel time to your destination reappears when you return
to the set route.

■

When receiving traffic information ahead on the set route

This device periodically checks the traffic information on the set route. When traffic informa-
tion is received, the message appears on the display and is spoken by the voice guidance. Fol-
low the instructions, and select the operation, such as searching detour. You can also check
the reception of traffic information manually.
Receiving traffic information using CUE is a pay service. (For details,

see “Using CUE Infor-

mation” on page 82

and

“About traffic information” on page 144

When receiving traffic information

For example, the message “There is <event> on the route within XX mile. Do you want to
reroute?” appears.
On this display, you can select the following items:

➲

You can also operate the Navigation System by speech. For details of voice operation, see
Chapter 7.

➲

When new traffic information arrives, the message “Traffic information has just been
updated” appears. If desired, check the new information. For details of how to do that,

see

“Confirming traffic information relevant to the current route” on page 82

➲

After the message just described appears, if you do not check the new information within
10 seconds, the message disappears. Check a new message if necessary.

➲

You can set whether you want the message asking you if you want your Navigation System
to search for a detour to appear. For details,

see “Traffic Reroute Alert” on page 100

Yes:

The route is recalculated taking the traffic jam into account.

No:

The message disappears, and the map display reappears.