!
Do not press the
h
button before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
1
Press the
h
button.
The
“
Monitor Setup
”
screen appears.
2
Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3
Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up-
side and press the card until it clicks and com-
pletely locks.
4
Press the
h
button.
The LCD panel closes.
p
If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Ejecting an SD memory card
1
Press the
h
button.
The
“
Monitor Setup
”
screen appears.
2
Touch [Eject SD].
The LCD panel opens.
p
Touch [
Yes
] if the message indicating that
the flap opens after the navigation system
restarts appears.
The navigation system restarts, and then the
LCD panel opens.
3
Press the middle of the SD memory
card gently until it clicks.
4
Pull the SD memory card out straight.
5
Press the
h
button.
The LCD panel closes.
Engb
14
Chapter
02
Basic operation