!
Do not operate this navigation system until
the LCD panel completely opens or closes. If
this navigation system is operated while the
LCD panel is opening or closing, the LCD
panel may stop at that angle for safety.
!
Do not place a glass or a can on the open
LCD panel. Doing so may break this naviga-
tion system.
!
Do not insert anything other than a disc into
the disc loading slot.
1
Press the
h
button.
The
“
Monitor Setup
”
screen appears.
2
Touch [Open].
The LCD panel opens, and the disc loading
slot appears.
3
Insert a disc into the disc loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc
1
Press the
h
button.
The
“
Monitor Setup
”
screen appears.
2
Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3
Remove the disc, and press the
h
but-
ton.
The LCD panel closes.
Inserting and ejecting an
SD memory card
WARNING
Ejecting an SD memory card during data transfer
can damage the SD memory card. Be sure to
eject the SD memory card by following the proce-
dure described in this manual.
CAUTION
If data loss or corruption occurs on the storage
device for any reason, it is usually not possible to
recover the data. Pioneer accepts no liability for
damages, costs or expenses arising from data
loss or corruption.
p
This system is not compatible with Multi
Media Card (MMC).
p
Compatibility with all SD memory cards is
not guaranteed.
p
This unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
CAUTION
!
Do not press the
h
button when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
Engb
13
Chapter
02
Basic
operation
Basic operation