- 136 -
En
g
lis
h
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.
NOTES
•
Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
•
Do not turn off the engine while saving the adjusted position data.
•
This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
NOTE
This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
[Beep Tone]
Menu Item
Description
[Beep Tone]
[On] [Off]
Select [Off] to disable the beep sound when the button is
pressed or the screen is touched.
[Touch Panel Calibration]
Menu Item
Description
[Touch Panel Calibration]
1
Touch two corners of the screen along the arrows then
touch the centers of the two [+] marks at the same
time twice.
2
Press .
The adjustment results are saved.
3
Press
once again.
Proceed to 16-point adjustment.
4
Gently touch the center of the [+] mark displayed on
the screen.
The target indicates the order.
•
When you press
, the previous adjustment
position returns.
•
When you press and hold
, the adjustment is
canceled.
5
Press and hold
.
The adjustment results are saved.
[Dimmer Settings]
Menu Item
Description
[Dimmer Trigger]
Setting the dimmer brightness.
W6500NEX