19
App
en
d
ix
Appendix
Troubleshooting
➲
About troubleshooting other than description
below
➞
Appendix of the Operation Manual
Symptom
Cause
Action (See)
There’s no picture.
The handbrake cord is not connected.
Connect a handbrake cord, and apply the
handbrake.
The handbrake is not applied.
Connect a handbrake cord, and apply the
handbrake.
The icon
is
displayed, and
operation is not
possible.
The operation is prohibited for the disc.
This operation is not possible.
The operation is not compatible with the
disc’s organization.
This operation is not possible.
The picture stops
(pauses) and the unit
cannot be operated.
Reading of data has become impossible
during playback.
After pressing
7
once, start playback once
more.
The picture is
stretched, the aspect is
incorrect.
The aspect setting is incorrect for the
display.
Select the appropriate setting for your
display. (Page 15)
Rear display picture
disappears.
• The source disc being listened to with the
product has been ejected.
• The disc without a video source is
playbacked.
• The
REAR
button was pressed and REAR
ON mode switched off.
• There was a problem with the rear display
or a faulty wiring connection, for example.
•
Rear View
is selected on the screen.
• When the gearstick is in [R], displays rear
view camera images. (When “
NAVI
” is
selected in
REAR DISP
menu.)
• Before ejecting the disc, switch the
source.
• Switch the source with a video source.
• Press the
REAR
button to turn REAR ON
mode on.
• Check the rear display and its connection.
• Select view mode other than Rear View.
• Select
SOURCE
in
REAR DISP
menu.(or
when you move the shift lever other than
[R] position, the screen will be returned to
the previous display.)
Nothing is displayed
and the touch panel
keys cannot use.
The setting for the rear view camera is
incorrect.
The gearstick was placed in [R] when the
rear view camera was not connected.
Connect a rear view camera correctly.
Press
NAVI/AV
button to return to the
source display and then select the correct
setting for
CAMERA
.
➲
About
CAMERA
setting
➞
Operation
Manual
LCD Panel knocking
against your vehicle’s
console or dashboard.
Incorrect setting of angle.
Press
ANGLE (+/–)
to adjust the LCD
angle. Forcibly adjusting the LCD panel by
hand may damage it.
Video image appears
grainy.
This happens when videos are viewed in
CINEMA
or
ZOOM
mode.
Select a different mode to view videos.
MAN-AVIC-X1R-EN.book Page 19 Wednesday, May 4, 2005 4:45 PM
