45
BDP-09FD
5
6
7
8
5
6
7
8
A
B
C
D
E
F
Side alminum L
Side alminum R
1
2
1
2
2
2
3
3
Side L
Side R
Points to be checked durin
g
reassemblin
g
When reassembling, check the following points.
Use the values as guides.
Remove the two screws. (BBZ30P0
8
0FCC)
1
Side alminum L and R
Remove the four screws. (
V
BA1115)
2
Remove the side alminums L and R.
3
Side aluminum L
Side aluminum R
Top aluminum
Gap between the top aluminum and side aluminum L or R
: 0.6 mm or less
Gap between the front aluminum and top aluminum
: 0.4 mm or less
Gap between the front aluminum and
side aluminum L
: 0.5 mm or less
Protrusion of the side aluminum L from the panel base
: 0.1 mm or less
Gap between the front aluminum and
side aluminum R
: 0.5 mm or less
Front
Top aluminum
Side aluminum
Panel base
The level of the top aluminum must be
slightly lower than the side aluminum L or R panel.
Gap between the panel base and side aluminum L or R
Upper side: 0.3 mm or less
Gap between the panel base and side aluminum L or R
lower side: 0.5 mm or less
The level of the top aluminum must be
slightly lower than the front aluminum.
Side View
Protrusion of the side aluminum R from the panel base
: 0.1 mm or less