62
BDP-09FD
1
2
3
4
A
B
C
D
E
F
1
2
3
4
CPRM ID Re
g
istration Mode
2
3
4
• Conditions for enterin
g
CPRM ID Re
g
istration mode
During Playback Stop mode, press the ESC then STEREO
keys.
The above key inputs are accepted only during
N
ormal
Playback Stop mode.
• Conditions for exitin
g
CPRM ID Re
g
istration mode
Press the CLEAR key to return to
N
ormal mode.
• How to input the ID No. and ID data
1
To enter Input mode, press the ESC then STEREO keys.
2
After entering Input mode, input a 9-digit ID
N
o.
(The number is displayed on the FL display.)
The
ID
N
o. is described on the ID label located on the
rear panel of the product.
3
After the 9-digit ID
N
o. is input, the SEARCH key will be
accepted. If it is pressed, the ID
N
o. will be displayed.
4
After the ID
N
o. is set, the unit awaits ID data input.
("I
N
SERT ID DATA" is displayed on the FL display.)
Load the ID data disc in the disc tray. As soon as the tray
is closed, reading of the data will start.
6
After reading of the ID data is completed, writing of the
data on the flash ROM will start. ("WRITE ID DATA" is
displayed on the FL display.)
7
Upon completion of writing on the flash ROM, "Rom
Write OK!" will be displayed. ("ID DATA OK" will be
displayed on the FL display.)
The background color of the screen will change to blue
when writing of various key data is successfully
completed. If writing fails, the background color will
change to red.
8
Upon completion of writing, press the CLEAR key to exit
Input
mode.
5
During data reading, the indications below will be
displayed. ("LOAD ID DATA" is displayed on the FL
display.)
5
6
7
8
When writing is successfully completed
When writing fails
