CDJ-100S
48
SPECIFICATIONS
1. General
System ................................ Compact disc digital audio system
Power requirementsAC 120 V, 60 Hz
Power consumption .............................................................. 12 W
Operating temperature .................. +5˚C – +35˚C (+41°F – +95°F)
Operating humidity ....................................................... 5% – 85%
(There should be no condensation of moisture.)
Weight .............................................................. 2.2 kg (4 lbs 14 oz)
Dimensions ......................... 217.7 (W)
×
310.7 (D)
×
94.5 (H) mm
8-9/16 (W)
×
12-1/4 (D)
×
3-3/4 (H) in.
2. Audio section
Frequency response ..................................... 4 Hz – 20 kHz (EIAJ)
Signal-to-noise ratio ................................... 96 dB or more (EIAJ)
Output level ............................................................................ 2.0 V
Channels ........................................................... 2-channel (stereo)
3. Accessories
÷
Operating instructions ............................................................. 1
÷
Audio cable ............................................................................... 1
÷
Limited warranty ...................................................................... 1
NOTE:
Specifications and design are subject to possible modification
without notice.
Maintenance:
We recommend regular maintenance to ensure the safe
and proper function of this unit.
Extended service life can be expected if the unit main-
tained properly.
Display Window
1
TRACK number display
Displays the current number of the track playing.
2
CUE indicator
Flashes when it is possible to input cue point, and
lights steadily after the completion of input.
3
Time display (REMAIN)
The elapsed playback time of the track being played
(when the REMAIN indicator is off) or the remaining
playback time of the track being played (when the
REMAIN indicator is on) is displayed in minutes (M)
and seconds (S), or frames (F).
4
Playback tempo display
Tempo changes made with the TEMPO control knob
are performed in 0.1% steps in the ±10% range. 0 to
+10% in the +10% to –16% range is indicated in 0.1%
steps and 0.2% steps from 0 to –16%.
5
MT indicator
Lights when the MASTER TEMPO function is used.
6
A.CUE indicator
Lights when the AUTO CUE function is used.
7
Playback address display
The elapsed playback time or remaining playback time
of the track playing is roughly indicated with the full-
scaled bar graph.
÷
When no disc is in the
disc compartment ................................................ off
÷
When displaying elapsed
playback time .............. lights up from the left side
÷
When displaying remaining
playback time .............. turns off from the left side
÷
When remaining playback time is
less than 30 seconds ..................................... blinks
8
WAH indicator
Lights or blinks when WAH function is active.
9
Pause indicator (
*
)
Blinks during pause mode.
0
ZIP indicator
Lights or blinks when ZIP function is active.
-
JET indicator
Lights or blinks when JET function is active.
=
Play indicator (
#
)
Lights during playback.
