12
How to Upgrade Your Naviga-
tion
The programme is installed to the navigation sys-
tem using the application disc.
When installing the programme, you carry out
the following operations. When all the setup pro-
cedures are completed, you can use the naviga-
tion system.
The screen images used in this section are AVIC-
X1R as an example.
1
Park your vehicle in a safe place.
Leave the engine on, and make sure that the
handbrake is applied.
2
Press EJECT button to remove the current
disc.
3
Insert the new Pioneer DVD Map Disc
into the disc loading slot of the navigation
system.
When the upgraded programme has been
found, installation of the programme starts
immediately.
❒
If you cannot insert a disc completely or if
an inserted disc is not recognised, check
that the label side of the disc is up. Press
the
EJECT
button to eject the disc, and
check the disc for damage before inserting
the disc again.
• Once the installation of the programme
starts, do not stop the engine of your vehi-
cle nor switch off the navigation system
until the installation is completed and the
following Audio screen appears.
4
Press the NAVI/AV button to change the
navigation screen.
5
Touch “Yes/Oui/Ja”.
When you start the navigation system for the
first time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the naviga-
tion system. If desired, you can select another
language as shown.
❒
To keep English, touch “
No/Non/Nein
”.
After this, proceed to Step 7.
❒
When you want to select another lan-
guage,touch “
Yes/Oui/Ja
”, and proceed
to the next step.
6
Select the language from the list.
Touch the language you want to use.
The language selected here is reflected for the
Navigation functions (e.g., Destination
search, etc.) only.
Installation of the programme, in the lan-
guage you chose, begins.
MAN-CNDV-60M-EN.fm Page 12 Wednesday, April 5, 2006 2:02 PM
