SLA
(source level adjustment)
SLA
(Source Level Adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
!
Settings are based on the FM volume level, which
remains unchanged.
!
The AM volume level can also be adjusted with
this function.
!
When selecting FM as the source, you cannot
switch to
SLA
.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to adjust the source volume.
Adjustment range:
+4
to
–
4
3
Press
M.C.
to confirm the selection.
Initial Settings
1
Press and hold S (SRC/OFF) until the
unit turns off.
2
Press M.C. and hold until function name
appears in the display.
3
Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
CLOCK SET
(setting the clock)
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to select the segment of the clock dis-
play you wish to set.
Hour
—
Minute
3
Turn
M.C.
to adjust the clock.
AUX
(auxiliary input)
Activate this setting when using an auxiliary device
connected to this unit.
1
Press
M.C.
to turn
AUX
on or off.
USB
(plug and play)
This setting allows you to switch your source to
USB
automatically.
1
Press
M.C.
to turn the plug and play function on
or off.
ON
–
When USB storage device is connected, de-
pending on the type of device, the source is auto-
matically switched to
USB
when you turn on the
engine. If you disconnect your USB storage de-
vice, this unit
’
s source is turned off.
OFF
–
When USB storage device is connected,
the source is not switched to
USB
automatically.
Please change the source to
USB
manually.
SW CONTROL
(rear output and subwoofer setting)
The rear speaker leads output and RCA output can be
used for full-range speaker or subwoofer connection.
If you switch to
REAR-SP
:
SW
, you can connect a rear
speaker lead directly to a subwoofer without using an
auxiliary amp.
Initially,
REAR-SP
is set for rear full-range speaker
connection (
FUL
).
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to change the output and press to se-
lect.
REAR-SP
(Rear speaker leads output)
—
PREOUT
(RCA output)
3
Turn
M.C.
to change the setting.
REAR-SP
:
FUL
—
SW
PREOUT
:
SW
—
REA
!
Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to
SUBWOOFER1
(subwoofer on/
off setting)
on the previous page).
!
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
DEMO
(demo display setting)
1
Press
M.C.
to turn the demo display on or off.
SCROLL
(scroll mode setting)
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1
Press
M.C.
to turn the ever scroll on or off.
Using an AUX source
1
Insert the stereo mini plug into the
AUX input jack.
En
10
Section
01
Operating this unit
2
Press S (SRC/OFF) to select AUX as the
source.
#
AUX cannot be selected unless the auxiliary
setting is turned on. For more details, refer to
AUX
(auxiliary input)
on the previous page.
Turning the clock display
on or off
%
Press
to turn the clock display on or
off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
En
11
English
Section
01
Operating this unit
<CRD4529-A/S>
6
Summary of Contents for DEH-23UB
Page 34: ...Es 66 67 CRD4529 A S 34 ...
Page 35: ... CRD4529 A S 35 ...
