Black plate (13,1)
<CRD4029-A/N>13
3 Press
a
or
b
to set the clock.
Pressing
a
will increase the selected hour or
minute. Pressing
b
will decrease the selected
hour or minute.
#
To cancel clock settings, press
BAND
.
#
You can also cancel clock settings by holding
down
AUDIO
until the unit turns off.
Turning the clock display on or off
You can turn the clock display on or off.
%
Press CLOCK to turn the clockdisplay
on or off.
Each press of
CLOCK
turns the clock display
on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
!
If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune
in the stations with manual tuning or use
seek tuning again.
1 Press AUDIO to select FM.
2 Press
c
or
d
to select the FM tuning
step.
Press
c
to select
50
(50 kHz). Press
d
to se-
lect
100
(100 kHz).
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
1 602 kHz allowable) to 10 kHz (530
1 640
kHz allowable).
1 Press AUDIO to select AM.
2 Press
c
or
d
to select the AM tuning
step.
Press
c
to select
9
(9 kHz). Press
d
to select
10
(10 kHz).
Operating this unit
En
13
English
Section
03
