Black plate (7,1)
<CRD4029-A/N>7
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling broadcast
frequencies
If you press any of the preset tuning buttons
1
6
you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!
Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1
6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#
You can also use
a
and
b
to recall radio sta-
tion frequencies assigned to preset tuning but-
tons
1
6
.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%
Press LOCAL/BSM repeatedly to turn
local seektuning on or off.
When local seek tuning is on,
LOC
appears in
the display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons
1
6
.
Once stored you can tune in to those frequen-
cies with the touch of button.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons
1
6
.
%
Press LOCAL/BSM and hold until the
BSM turns on.
BSM
begins to flash. While
BSM
is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons
1
6
in the
order of their signal strength. When finished,
BSM
stops flashing.
#
To cancel the storage process, press
LOCAL/BSM
.
Operating this unit
En
7
English
Section
03
