Display the ID Code (RADIO ID)
Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when
activating XM service or when reporting a problem. How to display the ID Code depends
on the Channel Select mode.
7
Channel Number Select mode
If you select “CH 00”, the ID Code is displayed.
• Select the Channel Number zero (CH 00) with the
2
2
/
3
3
buttons.
7
Channel Category Select mode
“RADIO ID” is provided as a Channel Category for displaying the ID Code.
• Select the Channel Category “RADIO ID” with the
5
5
/
∞
∞
buttons.
Note:
• If you select another Channel, display of the ID Code is canceled.
• Display of the ID Code repeats displaying “RADIO ID” and the ID Code one after the other.
Messages
When problems occur with XM tuner, a message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action.
Message
Possible cause
Recommended action
ANTENNA
The XM antenna is
Check whether the XM antenna cable
not connected.
is attached securely.
A short-circuit occurring in
Make sure that there is nothing unusual
the antenna or the surrounding
with the antenna or antenna cable.
antenna cable.
UPDATING
Radio is being updated with
Wait until encryption code is being
latest encryption code.
updated. Channels 00 and 01 should
function normally.
NOSIGNAL
XM signal is too weak at the
Wait until the car reaches a location
current location.
with a stronger signal.
LOADING
Unit is acquiring audio or
Wait until the unit has received the
program information.
information.
OFF AIR
The channel currently selected
Select another channel.
has stopped broadcasting.
– – – – – – – –
The user has selected a Channel
Automatically switches to Channel 01.
Number that does not exist or is
not subscribed to.
– – – –
There is no artist name/feature,
No action needed.
song/program title, or additional
information associated with the
channel at that time.
24
ENGLISH
ESPA
Ñ
OL
DEUTSCH
FRAN
Ç
AIS
ITALIANO
NEDERLANDS
