DEH-P7200HD/XNUC
34
1
2
3
4
1
2
3
4
C
D
F
A
B
E
6.3 WWR TEST MODE
1. Outline
Conducting the test on the WWR module and displaying the test result on the OEL.
2. How to operate
Press Reset button while pressing TAG + EJECT.
Transmission of the commands for the test mode
The commands that are required to be transmitted for the test mode are as listed in the table below:
Command Required
Description
Switch the mode between Split and Normal
Switch the blend mode between Digital and Analog
Set the blend mode to Auto
Reset Errors
Digital only mode / Analog only mode
Auto mode
Split mode (Left = Analog, Right = Digital)
/ Normal mode
Reacquire the digital signal
Reset the information below
Audio Frame Information /
Core Audio Frame Errors Information
P3 BER Information / PIDS BLKR Information
/ Core Audio Frame Error Rate Information
Enhanced Audio Frame Errors Information / Enhanced Audio Frame Error Rate Information
and the digital sound from the right speaker
Number of Blend Information / P1 BER Information / P2 BER Information
* Split mode: the mode that outputs the analog sound from the left speaker
HDR reacquisition request
Then, turn on the TUNER.
The keys to be actually used in the test mode are assigned to the 1 to 6 keys of the remote control shown in the above table and
output the dedicated test mode commands.
Other keys output the same commands as in the normal TUNER operation.
Operation
KEY
Press 3 (Remote Control) for two seconds or longer
Press 5 (Remote Control) for two seconds or longer
Press 6 (Remote Control) for two seconds or longer
Press 4 (Remote Control) for two seconds or longer
Short Press 6 (Remote Control)
Press 1 (Remote Control) for two seconds or longer
Press 1 (Remote Control) for two seconds or longer
Short Press 5 (Remote Control)
Short Press 2 (Remote Control)
Short Press 4 (Remote Control)
Short Press 3 (Remote Control)
Short Press 1 (Remote Control)
Reset Errors
WWR-V.UP Mode Change (for rewriting with GK jig)
Go up to switch the display item
Go down to switch the display item
Digital only mode / Analog only mode
HDR reacquisition request
Switch the display mode
Split mode (Left = Analog, Right = Digital) / Normal mode
Auto mode
Details of the Information
HD Icon (information of the audio being received)
BAND
Stereo Icon
Pch Number
LOC Icon
Frequency
When displaying the character string
HD Icon (information of the audio being received)
BAND
Stereo Icon
Pch Number
LOC Icon
Display the left-aligned character string of the test result that was sent from the WWR module as it was received.
3. Details of the information to be displayed
When displaying the TUNER frequency
TUNER
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299